|
Load Capacity
AMSOIL Series 2000 Racing Grease is an extreme-pressure
multi-purpose grease formulated for high-temperature/high-speed
applications. It also provides superior protection for low-speed
bearings, a job usually reserved for heavy-duty products.
Components get the load bearing capacity of a heavy-duty grease
without sacrificing the high-temperature protection of a
multi-purpose.
Anti-Wear Performance
AMSOIL Series 2000 Racing Grease is designed to deliver maximum
protection in the intense environments found in racing
applications. Its high-performance anti-wear additive package
helps ensure maximum component life.
All-Temperature Protection
AMSOIL Series 2000 Racing Grease pairs a high Viscosity Index
synthetic base oil with a top-quality lithium complex thickener,
known for its extraordinary performance in temperature extremes.
AMSOIL Series 2000 Racing Grease offers excellent
low-temperature pumpability and high-temperature consistency for
dependable all-temperature protection.
Oxidation Resistance and Inhibition
AMSOIL Series 2000 Racing Grease offers excellent oxidation
resistance and a robust package of oxidation inhibitors, helping
to prevent grease breakdown and component surface damage in the
high oxidizing conditions associated with high-temperature
operation.
Friction Reduction
Because it effectively reduces friction, AMSOIL Series 2000
Racing Grease maximizes power through-put and fuel efficiency.
Its superior friction-reduction properties help ensure race
vehicles operate at peak performance.
Washout Resistance and Corrosion
Inhibition
AMSOIL Series 2000 Racing Grease resists water wash-out and
inhibits rust and other forms of corrosion.
Applications
AMSOIL Series 2000 Synthetic Racing Grease meets the highest
performance standards of the National Lubricating Grease
Institute; GC for wheel bearing applications and LB for chassis
applications.
|
Typical Technical
Properties |
|
AMSOIL Synthetic Lithium
Complex Racing Grease
|
Series 2000 Racing Grease |
NLGI
GC-LB |
| Thickener |
Lithium
Complex |
NR* |
| NLGI
Consistency Grade |
2 EP |
NR* |
| NLGI
Performance Grade |
GC-LB |
NR* |
| Penetration
(ASTM D-217) 25° C [77° F], 0.1 mm Worked 60 strokes |
265 - 295 |
220 - 340 |
| Dropping
Point (ASTM D-566) °C [77° F] |
285 [545] |
220 [428] |
| Water Washout
(ASTM D-1264) 79° C [175° F] % loss |
5.1 |
15 max |
| Oil
Separation (ASTM D-1742) 24 hr. @ 25° C [77° F], % loss |
2.8 |
10 max |
| Rust
Protection (ASTM D-1743) |
pass |
pass |
| Timken OK
Load Test (ASTM D-2509), lbs. |
60 |
NR* |
| Fortified
with Moly Compound |
no |
NR* |
| Four Ball
Wear Test (ASTM D-2266) Wear Scar Diameter, mm |
0.32 |
0.9 max |
| Compatibility
with other greases |
excellent |
NR* |
| Extreme
Pressure, Four Ball Method (ASTM D-2596) Weld Point, kgf |
400 |
200 min |
| Extreme
Pressure, Four Ball Method (ASTM D-2596) Load Wear
Index, kgf |
65 |
30 min |
| High
Temperature Life (ASTM D-3527) hours |
300 |
80 min |
| Fretting Wear
(ASTM D-4170)* mg |
3.4 |
10 max |
| Elastomer
Compatibility (ASTM D-4289) Volume Change, %, GC |
21.6 |
-5 to +30 |
| Elastomer
Compatibility (ASTM D-4289) Volume Change, %, LB |
9.88 |
0 to +30 |
| Elastomer
Compatibility (ASTM D-4289) Hardness Change, durometer-A
points, GC |
-3 |
+2 to -15 |
| Elastomer
Compatibility (ASTM D-4289) Hardness Change, durometer-A
points, LB |
-6 |
0 to -10 |
| Leakage (ASTM
D-4290), G* |
6.0 |
10 max |
| Low
Temperature Torque (ASTM D-4693) n·m, max @ -40° C [-40°
F] |
2.3 |
15.5 |
| Water Spray
Off (ASTM D-4049), % max |
22.7 |
NR* |
|
* NR: Not Required for NLGI GC or LB labeling |
|