AMSOIL Synthetic Multi-Purpose Grease, NLGI #0 (GLA)

AMSOIL Synthetic Multi-Purpose Grease, NLGI #0 (GLA)

See Pricing Information or Place an Order

Package sizes include:

35-lb. Lug
120-lb. Keg
400-lb. Drum

(no cartridge sizes available for grade NLGI #0):

PRODUCT DESCRIPTION
AMSOIL Synthetic Multi-Purpose Greases are qualified against the highest grease standards and are designed for multiple use applications. Composed of premium quality synthetic base oils and lithium complex thickeners, Multi-Purpose Greases provide superior film strength, shear resistance, adhesion properties and mechanical stability, and they excel in temperature extremes by providing excellent oxidation stability, high temperature dropping points and low temperature torque values and pumping capabilities. AMSOIL Synthetic Multi-Purpose Greases are formulated with oil soluble extreme-pressure additives for heavy loads, as well as oxidation and corrosion inhibitors that impart good oxidation stability and rust protection.

PERFORMANCE FEATURES

High dropping point of 430^°F
Resists thermal and oxidation degradation
Excellent water-washout resistance
Good low temperature pumpability and torque values
Adhesive and shear stable to prevent squeeze out

Applications or Requirements

GLA (#0) Cincinnati Milicron P-79 Spec

APPLICATION RECOMMENDATION
AMSOIL Synthetic Multi-Purpose Grease grade #0 is recommended in manual or automatic lubricating systems. NLGI #0 (GLA) has better mobility and is the preferred choice for colder applications, automatic lubrication systems with long pumping runs and gear box applications (where recommended by manufacturer).

The correct consistency grade of AMSOIL Synthetic Multi-Purpose Grease is recommended in heavy and light duty applications found in manufacturing plants, automobiles, agricultural and construction equipment. These include, but are not limited to, roller bearings, plain bearings, thrust bearings, gears, electric motors, presses, winches, bushings, wheel bearings, chassis lubrication, universal joints, ball joints, tie-rod ends, and steering knuckles. AMSOIL Synthetic Multi-Purpose Greases are suitable for use up to 350 degrees F. When operating at elevated temperatures, frequent regreasing may be required.

AMSOIL Synthetic Multi-Purpose Greases are compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of Multi-Purpose Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL Inc.

APPLICATION MAINTENANCE
Maintaining a clean work environment is important when equipment greasing is performed. Wipe grease fittings clean prior to injecting grease to prevent contaminant ingestion. Maintain bearing housings one-third to one-half full of grease. Do not over-grease, as excessive heat buildup can result. Supplement standard grease maintenance by periodically cleaning and packing housings with fresh grease on an established maintenance schedule.

Typical Technical Properties
Synthetic GLA Grease	GLA
Thickener	lithium complex
NLGI consistency grade	0
NLGI performance grade	NA
Penetration - ASTM D 217 (25°C [77°F], 0.1 mm) worked 60 strokes	355-385
Dropping point, °F[°C] - ASTM D2265	430 [221]
High temperature life, hours - ASTM D 3527	120
Oxidation stability, psi - ASTM D 942 (100 hr/300 hr)	1/5
Water washout, percent - ASTM D 1264	16.7
Rust and corrosion - ASTM D 1743	pass
Oil separation, percent loss - ASTM D 1742 (24 hours, 25°C [77°F]	5.2
Leakage, g lost - ASTM D 4290	NA
Four ball wear test, mm scar - ASTM D 2266	0.45
Fretting wear, mg - ASTM D 4170	NA
Four ball EP, kgf - ASTM D 2596 Weld point Load wear index	315 47
Timken OK load test, lbs - ASTM D 2509	45
Low temperature torque, N*m - ASTM D 4693 (-40°C [-40°F])	0.46
LT-37 pumpability, g/min (60°F/0°F [16°C/-18°C])	1475/73
Copper corrosion - ASTM D 4048	1B
Disc brake wheel bearing specifications Ford ESA-M1C 198-A Chrysler MS-3701	NA NA
Oil viscosity: 40°C [104°F], cSt 100°C [212°F], cSt	151 19.2
Flash point, °F[°C] - ASTM 92	450[232]
Color	red
Texture	smooth with tack
NA: Not applicable