AMSOIL Saber™ Professional Synthetic 2-Cycle Oil

AMSOIL Saber Professional (ATP) Synthetic 2-Cycle Oil is specifically designed for lean mix ratios in pre-mix applications. Saber Professional contains high temperature detergents for small power equipment. Extensive testing shows superior lubricity and cleanliness properties at lean mix ratios of this premium synthetic formulation.

Saber Professional is virtually "Smokeless"
At 100:1, this oil produces lower emissions than oils mixed at 50:1
Saber Professional is recommended for ISO-L-EGD applications
One mix ratio for everything eliminates confusion
Versatile and very good for many applications
Cost effective compared to oils mixed at 50:1 or richer
Lean mix ratio helps prevent plug fouling and exhaust port deposits

Product Description
AMSOIL Saber Professional (ATP) Synthetic 100:1 Pre-Mix 2-Cycle Oil is formulated with exclusive AMSOIL synthetic base oils and premium additives. Designed for lean mix ratios in two-cycle motors, Saber Professional 2-Cycle Oil has excellent lubricity and cleanliness properties that control friction, wear, plug fouling, ring sticking and exhaust port blocking. AMSOIL Synthetic 100:1 2-Cycle Oils have been protecting and providing improved performance in two-cycle motors since 1973.

Saber Professional
Saber Professional (ATP) is specifically designed for small engines including, but not limited to, chain saws, lawn equipment, blowers, chop saws, pumps, scooters and go-carts. It is also very good for use in motorcycles, snowmobiles, ATVs, jet boats and personal watercraft. Saber Professional is formulated with high temperature detergent additives that limit hard carbon deposit formations in hot operating motors. Saber Professional is “smokeless” and delivers lower emissions at 100:1 mix ratios than oils mixed at 50:1. Equipment operators subjected to smoke and fumes will benefit from these low emission properties. Because one mix ratio satisfies multiple pieces of equipment, Saber Professional eliminates mix ratio confusion. Saber Professional is recommended for pre-mix where ISO-L-EGD, JASO FC or API TC is specified.

Applications (see Two-Cycle Recommendations Chart)
AMSOIL Saber 100:1 2-Cycle Oil is recommended for 100:1 mix ratios in normal service. Richer mix ratios may be used where desired.

TYPICAL TECHNICAL PROPERTIES Saber Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP)
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)	13.5
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)	99
Viscosity Index (ASTM D-2270)	136
Pour Point °C (°F) (ASTM D 97)	-38 (-36)
Flash Point °C (°F) (ASTM D 92)	114 (237)
Fire Point °C (°F) (ASTM D 92)	114 (237)
DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN.