APPLICATIONS
AMSOIL Synthetic 5W-30 Motor Oil is
recommended for gasoline engines, diesel
engines (API CF, ACEA B5) and other
applications requiring any of the listed
worldwide specifications:
- API
SM/CF, SL, SJ ...
-
ILSAC GF-4- 3 ...
- ACEA
A5/B5-04
- JASO
VTW
- GM
4718M, 6094M
- Ford
WSS M2C929-A
- Daimler Chrysler
MS-6395N
- VW 503.00
MIXING AMSOIL
AMSOIL ASL is compatible with
conventional and synthetic motor oils.
Mixing AMSOIL motor oils with other
oils, however, will shorten the oil life
expectancy and reduce the performance
benefits. AMSOIL does not support
extended drain intervals where oils have
been mixed.
Aftermarket oil
additives are not recommended for use
with AMSOIL motor oils.
SERVICE LIFE
AMSOIL Synthetic 5W-30 Motor Oil is
recommended for extended drain intervals
in unmodified(1), mechanically sound(2)
gasoline fueled
vehicles as follows:
• Normal Service(3) –
Up to 25,000 miles or one year,
whichever comes first.
• Severe Service(4) –
Up to 15,000 miles or one year,
whichever comes first.
• Replace AMSOIL Ea
oil filter at the time of oil change up
to 25,000 miles or one year, whichever
comes first (other brands at standard
OEM* intervals).
• In all non-gasoline
fueled vehicle applications, extend the
oil change interval according to oil
analysis or follow the OEM* drain
interval.
*OEM – Original
Equipment Manufacturer
(1) Engines operating
under modified conditions are excluded
from extended drain recommendations.
Examples include the use of performance
computer chips; non-OEM approved
exhaust, fuel or air induction systems;
and the use of fuels other than those
recommended for normal operation by the
manufacturer.
(2) Mechanically sound
engines are in good working condition
and do not, for example, leak oil or
consume excessive amounts, are not worn
out, do not overheat, do not leak
anti-freeze and have properly working
emission control systems. AMSOIL
recommends repairing malfunctioning
engines prior to the installation of
AMSOIL synthetic oils.
(3) Personal vehicles
frequently traveling greater than 10
miles (16 km) at a time and not
operating under severe service.
(4) Turbo/supercharged
vehicles, commercial or fleet vehicles,
extensive engine idling, first and
subsequent use of AMSOIL in vehicles
with over 100,000 miles, daily short
trip driving less than 10 miles (16 km),
frequent towing, plowing, hauling or
dusty condition driving.
AMSOIL Ea full-flow
oil filters are designed for extended
drain intervals. They stop smaller
particles, flow more oil and last longer
than regular filters. For best
performance, use AMSOIL full-flow oil
filters.
HEALTH & SAFETY
This product is not expected to cause
health concerns when used for the
intended application and according to
the recomm endations in the Material
Safety Data Sheet (MSDS). An MSDS is
available upon request at 715-392-7101
or
on the AMSOIL Website.
|
TYPICAL TECHNICAL
PROPERTIES
|
|
AMSOIL
100% Synthetic 5W-30
Motor Oil (ASL)
|
|
Kinematic Viscosity @
100°C, cSt (ASTM D-445) |
10.6 |
|
Kinematic Viscosity @
40°C, cSt (ASTM D-445) |
57.3 |
|
Viscosity Index (ASTM
D-2270) |
178 |
|
CCS Viscosity @ -30°C,
cP (ASTM D-5293) |
5254 |
|
Pour Point °C (°F) (ASTM
D-97) |
-50 (-58) |
|
Flash Point °C (°F)
(ASTM D-92) |
228 (442) |
|
Four Ball Wear Test
(ASTM D-4172B: 40 kgf,
75°C, 1200 rpm, 1 hr),
Scar, mm |
0.35 |
|
Noack Volatility, %
weight loss (g/100g)
(ASTM D-5800)
|
6.6 |
|
High Temperature/High
Shear Viscosity
(ASTM D 4683 @ 150°C,
1.0 X 106 s.-1),
cP |
3.2 |
|
Total Base Number |
12.2 |
