 |
AMSOIL Synthetic Fuel
Efficient Automatic Transmission Fluid (ATL)
Package sizes include:
1-Quart
Bottle
1-Quart Bottles (case of 12)
2.5-Gallon Bottle
2.5-Gallon Bottles (case of 2)
30-Gallon Drum
55-Gallon Drum
|
Transmission Fluid
Evacuation Service:
Bulletin From Filter Manufacturers Council (16k PDF)
Easy Steps in Changing Transmission Fluid and Filter
AMSOIL Transmission fluid
recommendations for Cars and Light Duty Trucks
PRODUCT
DESCRIPTION
AMSOIL Synthetic Fuel Efficient Automatic Transmission Fluid (ATL) is
engineered to exceed the requirements of GM, Ford and Toyota where
low-viscosity oil is required. The highly-specialized properties of this
light-bodied fluid provide outstanding performance without compromising
protection, even in severe operating conditions.
Automatic transmissions
have become increasingly complex as vehicle manufacturers strive to
improve efficiency while satisfying consumer demands. Smaller,
smoother-shifting transmissions with longer fluid life capabilities and
heavier load capacities are now standard. Traditional ATFs, however, are
unable to meet these extreme requirements, and new fluids have emerged
with each new advancement in transmission engineering. AMSOIL, with its
original introduction of a synthetic ATF in 1980, remains the leader in
transmission fluid quality. AMSOIL Synthetic Fuel Efficient Automatic
Transmission Fluid is formulated with the highest-quality components to
exceed the most stringent industry standards. The quality and
performance of AMSOIL Synthetic ATF is guaranteed.
Fully Fortified
•
Anti-wear/extreme-pressure agents—Extend gear life
• Durable friction modifiers—Anti-shudder
• Anti-oxidants—Extend fluid life
• Seal conditioners—Reduce leaks
• Detergents and dispersants—Keep clean and control deposits
• Corrosion inhibitors—Control rust
• Anti-foam agents—Improve hydraulic function
EXCEPTIONAL HOT-
AND COLD-TEMPERATURE PERFORMANCE
Thermal Stability – Hot temperatures are no excuse for
poor reliability. Naturally heat-resistant and heavily fortified with
anti-oxidants, AMSOIL Synthetic Fuel Efficient Automatic Transmission
Fluid exceeds the most demanding oxidation requirements. It delivers
outstanding protection against sludge and varnish deposits that clog
narrow oil passages and contribute to clutch glazing. AMSOIL Fuel
Efficient ATF protects hot-running transmissions.
Cold-Temperature
Fluidity – Cold, thick automatic
transmission fluid lengthens shift times and reduces energy efficiency
(fuel economy). AMSOIL Synthetic Fuel Efficient ATF is wax-free and
delivers extraordinary cold-flow per formance (<-60°F pour point). It
helps improve shifting response and energy efficiency while reducing
warm-up times.
OUTSTANDING WEAR PROTECTION
Varying speeds and loads causes torque multiplication and extreme stress
on gears and bearings. To prevent wear damage resulting from
insufficient fluid film, AMSOIL Synthetic Fuel Efficient ATF is
formulated with high film strength (shear stability) and a select
anti-wear/extreme-pressure additive that develops a boundary layer of
protection between metal surfaces. Even though AMSOIL Synthetic Fuel
Efficient Automatic Transmission Fluid is a low-viscosity,
fuel-efficient fluid, it has demonstrated its ability to protect as well
as or better than higher-viscosity fluids in the most severe industry
tests.
FRICTION DURABILITY
Modern transmissions are smaller in design, yet are called upon to
deliver smoother shifts and longer fluid-life capabilities in
higher-horsepower and higher-torque conditions. AMSOIL placed great
emphasis on developing a fluid to effectively address the complex
demands related to friction. AMSOIL Synthetic Fuel Efficient Automatic
Transmission Fluid delivers outstanding clutch-holding capacity (static
friction), torque transfer ability (dynamic friction) and anti-shudder
properties (slipping torque-converter clutches).
EXTENDED FLUID SERVICE LIFE
Most drivers are unaware that transmissions commonly operate under
severe service and require shorter fluid drain intervals. AMSOIL
Synthetic Fuel Efficient Automatic Transmission Fluid is a long-life
fluid capable of extended service intervals. It provides an extra margin
of protection, especially when fluid change intervals are missed or
during heavy use; even during abuse. Drivers can count on AMSOIL Fuel
Efficient ATF to provide protection beyond conventional fluids.
APPLICATIONS
AMSOIL Synthetic Fuel Efficient Automatic Transmission Fluid is
recommended for automatic transmissions and other applications requiring
DEXRON® VI, MERCON® LV, SP or Toyota WS.
AMSOIL Synthetic Fuel Efficient Automatic Transmission
Fluid is backward compatible and replaces DEXRON® III fluids in older GM
automatic transmissions. (DEXRON® VI specification supersedes the
obsolete DEXRON® III in GM vehicles.)
*Not for use with CVT or Ford Type F applications.
EXTENDED FLUID SERVICE LIFE
Most drivers are unaware that transmissions commonly operate under
severe service and require shorter fluid drain intervals. AMSOIL
Synthetic Fuel Efficient Automatic Transmission Fluid is a long-life
fluid capable of extended service intervals. It provides an extra margin
of protection, especially when fluid change intervals are missed or
during heavy use; even during abuse. Drivers can count on AMSOIL Fuel
Efficient ATF to provide protection beyond conventional fluids.
| SERVICE LIFE |
|
|
| |
Recommendation for cars and light
duty trucks
|
| Specification |
Normal Service*
|
Severe Service*
|
| DEXRON® VI |
100,000 miles (160,000 km)
|
50,000 miles (80,000 km)
|
| MERCON® LV, SP |
Follow vehicle manufacturer's recommendations
|
| Toyota WS |
100,000 miles (160,000 km)
|
60,000 miles (96,000 km)
|
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the
intended application and according to the recommendations in the
Material Safety Data Sheet (MSDS). MSDS's are available upon request at
715-392-7101 or
on our website. Keep Out of Reach of Children.
Don't pollute. Return used oil to collection centers.
|
TYPICAL
TECHNICAL PROPERTIES |
|
AMSOIL Synthetic Fuel
Efficient Automatic Transmission Fluid (ATL)
|
|
Kinematic
Viscosity @ 100°C, cSt (ASTM D-445) |
6.0 |
|
Kinematic
Viscosity @ 40°C, cSt (ASTM D-445) |
29.8 |
|
Viscosity
Index (ASTM D-2270) |
153 |
|
Flash
Point °C (°F) (ASTM D-92)
|
226 (439) |
|
Fire
Point °C (°F) (ASTM D-92)
|
244 (471) |
|
Pour Point °C
(°F) (ASTM D-97) |
-53 (-63) |
|
Four Ball
Wear Test @ 75°C, 1200 rpm, 40 kg, 1 hr, Scar, mm (ASTM
D-4172)
|
0.40 |
|
Brookfield Viscosity, cP (ASTM D-2983)
|
9050
|
|
Copper
Corrosion, 150°C, 3 hr (ASTM D-130)
|
1b
|
T's Advanced Synthetics
Greg and Marcy Thurman
Your Nationwide
AMSOIL
Authorized Independent
Dealer
Nationwide US Warehouses,
Canada and Palm Harbor, FL
727-798-8552
E-Mail:
greg@tsadvancedsynthetics.com
If you
experience problems or have questions or comments about
our website please email us at
greg@tsadvancedsynthetics.com
Home
|
T's Privacy Policy
|
Links |
Contact Us
|