|
|
AMSOIL Engine and Transmission Flush (FLSH)
Prepares Engines and Transmissions For New
Oil
Package sizes include:
16-oz. Bottle
16-oz. Bottles (case of 12)
5-gallon pail
55-gallon drum
|
AMSOIL Engine and Transmission Flush (FLSH) helps
restore fuel economy, increase operating efficiency and reduce
emissions in gasoline and diesel engines, and automatic
transmissions. Its potent, detergent-based formula cleans sludge and
deposit build-up, promoting lower operating temperatures and reduced
oil consumption. AMSOIL Engine and Transmission Flush is safe on
parts and can be easily disposed of with waste oil.
Restores Vehicles to Like-New
New engines and transmissions run more efficiently, but over time
they gather harmful deposits that cause power and performance loss.
Stop-and-go driving, prolonged idling, short trips that do not allow
the engine to reach full operating temperature, towing, the
ingestion of airborne dirt, fuel dilution, water condensation and
oxidized oil all can promote sludge build-up in motor oil and
transmission fluid. As it settles, sludge clogs narrow oil passages,
restricting oil flow to vital parts, especially the upper valve
train area.
In transmissions, deposits can form on clutch
plates, causing hesitation and erratic shifting. Ultimately clutch
glazing can set in, reducing the life of the transmission. Deposits
in engines and transmissions can accelerate wear, causing power loss
and increased fuel consumption.
• Cleans engines and transmissions for
improved efficiency, fuel economy and lower emissions
• Prolongs equipment life
• Detergent-based formula more environmentally friendly
• Compatible with seals and gaskets
• One-treatment results
• Easily disposed of with waste oil
Installing new oil or transmission fluid into a
dirty vehicle may not be enough to remove deposits and increase
efficiency. The detergents and dispersants in some lubricants may
not be able to handle leftover sludge and deposits, and the new
lubricant soon becomes unfit for service, accelerating the formation
of even more harmful deposits.
AMSOIL Engine and Transmission Flush
Benefits
Unlike many flush products, AMSOIL Engine and Transmission Flush
features a multi-use formulation that dissolves and disperses
sludge, varnish and deposits in both engines and automatic
transmissions. Due to its detergent-based formulation, used AMSOIL
FLSH can be easily disposed of with waste oil, making it more
user-friendly. Its advanced formula of light base oil technology,
powerful detergents and dispersants provides safe cleaning action.
AMSOIL FLSH is compatible with both petroleum and synthetic oils,
preparing poorly maintained equipment for installation of new oil.
It represents the first step toward restoring neglected equipment to
top-notch performance. AMSOIL Engine and Transmission Flush provides
the following benefits in only one treatment:
Gasoline and Diesel Engines
• Helps loosen sticky valves and rings,
minimizing blow-by and reducing emissions
• Helps quiet lifter noise
• Promotes lower operating temperatures through sludge removal
• Easy disposal
Automatic Transmissions
• Cleans deposits in oil cooler and ports
• Helps unclog fluid passages
• Cleans deposits and varnish from clutch plates, helping
improve efficiency
• Promotes smoother operation and transmission life through
reduced shift delay
Applications
AMSOIL Engine and Transmission Flush is recommended for diesel and
gasoline engines, and automatic transmissions. It is not recommended
for CVT transmissions or differentials.
Directions for Use
Though it works in one treatment, AMSOIL Engine and Transmission
Flush is safe enough to be used at every oil change. If using a
flushing machine, follow the manufacturer’s recommendation.
Otherwise, use the following guidelines:
Engine: Add
16 oz. bottle of AMSOIL Engine and Transmission Flush to engine oil
fill port. Idle the engine for 10-15 minutes, then immediately drain
the oil. Ensure enough time for the system to completely
drain. Remove and replace the engine oil filter. Refill engine with
new engine oil in the viscosity grade recommended by the
manufacturer.
Transmission:
Engage emergency brake. Add 16 oz. bottle of AMSOIL Engine and
Transmission Flush to transmission oil fill port. Idle for 10-15
minutes; shift through drive and reverse. Do NOT place vehicle under
heavy load. Drain entire transmission and torque converter of fluid.
FILTER MUST BE CHANGED prior to refilling with new transmission
fluid.
NOTE: It is
not recommended to flush transmissions that do not have a removable
pan or access to the transmission filter.
 |
| (above) Automatic
transmission clutch plates pre-cleanup. Varnish and
glazing is heavy on some of the plates. |
 |
| (above) Automatic
transmission clutch plates after cleanup with AMSOIL
Engine and Transmission Flush reveal lighter glazing and
varnish. |
 |
| (above) Cylinder head
pre-cleanup. Note the sludge deposits on and around the
valve springs and push rod openings. |
 |
| (above) Cylinder head
after cleanup with AMSOIL Engine and Transmission Flush.
The valve springs and push rod openings are noticeably
cleaner, with fewer sludge deposits. The manufacturer’s
stamping is more easily seen. |
|
