AMSOIL
Provides Complete Vehicle Cold-Weather Protection
Extreme cold can cause conventional motor
oil, transmission fluid and gear lube to thicken, starving vital moving
parts of necessary lubrication. In many cases, thick motor oil will
prevent vehicles from starting. Cold, thick transmission fluid results
in delayed or sluggish shifts and inadequate protection for the
bearings, valves and other crucial parts. Thick gear lube, meanwhile,
requires more energy to turn the gears, reducing fuel efficiency.
Because gears and bearings in the axle housing are splash-lubricated,
conventional gear lubes that are too thick at cold temperatures can
starve internal components of lubrication, which can cause excessive
wear and premature failure.
Conventional petroleum lubricants thicken
because they often contain paraffins (wax). While modern refining
techniques remove most of the wax from petroleum oil, come wax-like
molecules remain. These wax-like molecules are soluble at ambient
temperatures above freezing, but crystallize into a honeycomb-like
structure at lower temperatures and cause circulation problems. At
startup, this can leave working parts unprotected while the lubricant
warms to a temperature that allows it to flow.
AMSOIL synthetic lubricants do not
contain paraffins. They provide outstanding low-temperature fluidity for
fast, dependable winter starts; quick, responsive shifts and immediate
startup protection.
Superior Fuel
and Coolant additives
Diesel applications can be especially sensitive to cold-weather issues.
As the temperature drops, the wax naturally found in diesel fuels begins
to form crystals. The point at which wax crystals form is known as the
cloud point. These wax crystals eventually clog the fuel filter and
starve the engine of fuel, preventing it from starting. While
low-quality fuels may form wax crystals in temperature as warm as 40°F,
most fuels have a cloud point near 32°F. The point at which the wax
crystals clog the fuel filter is known as cold filter-plugging
point (CFPP). AMSOIL Cold Flow Improver reduces the CFPP of
ultra-low-sulfur diesel fuel by as much as 20°F
for increased protection.
In frigid conditions,
motorists often idle vehicles for extended periods to warm the interiors
and defrost the windows. Not only can the practice be inconvenient, it
wastes fuel as well. AMSOIL Dominator® Coolant Boost uses proprietary
tiered-surfactant technology to provide quick and effective heat
transfer inside the radiator and cylinder heads, resulting in faster
engine warm-up times. As a result, vehicle interiors warm more quickly
and the defroster becomes effective sooner.
Transmission & Transfer Case
 
Synthetic Automatic
Transmission Fluid (ATF,
ATL) flows readily in cold temperatures
for almost instantaneous circulation and protection, inhibiting wear and
promoting fast responsive shifts.
Gasoline Engine/Diesel Engine
 
Signature Series
Synthetic Motor Oil (ASM,
ALM,
AZO,
ASL,
ATM)
and Premium API CJ-4 Synthetic Diesel Oil (DEO,
DME) feature ultra-low pour points to
ensure vehicles start immediately, even when the mercury plummets far
below zero.
Cooling System
Dominator® Coolant Boost
(RDCB)
inhibits harmful coolant system corrosion and reduces engine warm-up
times up to 30 percent.
Differentials
Severe Gear® Synthetic
Gear Lube (SVG,
SVT,
SVO)
remains fluid in sub-zero temperatures to provide immediate lubrication
and extend equipment life.
Diesel Fuel System
  
Cold Flow Improver (ACF)
helps prevent icing or gelling in diesel fuel, while Diesel
Concentrate plus Cold Flow Improver (DFC)
provides the added benefit of increased fuel economy. Diesel Recovery
(DRC)
quickly liquefies gelled diesel fuel, thaws frozen fuel filters and
reduces the need for a new filter in untreated fuel that has gelled.
*Consult the Online
Product Application Guide for specific vehicle recommendations
T's Advanced Synthetics
Greg and Marcy Thurman
Your Nationwide
AMSOIL
Authorized Independent
Dealer
Nationwide US Warehouses,
Canada and Palm Harbor, FL
727-798-8552
E-Mail:
greg@tsadvancedsynthetics.com
If you
experience problems or have questions or comments about
our website please email us at
greg@tsadvancedsynthetics.com
Home
|
T's Privacy Policy
|
Links |
Contact Us
|
