|
AMSOIL Synthetic 10W-30/SAE
30
Diesel Oil Provides Superior Mono- and Multi-Grade Protection
AMSOIL Synthetic 10W-30/SAE 30 Heavy Duty Diesel Oil (ACD)
is formulated with premium synthetic base oils that exceed both 10W-30
multi-grade and SAE 30 straight-grade viscosity requirements for
outstanding performance in modern and older diesel engines. Unlike
conventional SAE 30 motor oils, AMSOIL ACD has a naturally high
viscosity index and does not contain paraffin (wax). It has a -33°F pour
point and qualifies for SAE 10W, making it an all-season multigrade
lubricant with a wide operating temperature range. AMSOIL ACD is
formulated without viscosity index (VI) improvers. This shear-stable
formulation is designed to stop viscosity loss and associated bearing
and cylinder bore wear. AMSOIL Synthetic 10W-30/SAE 30 Heavy Duty Diesel
Oil contains premium additives with a high 12 TBN to neutralize acids
from blow-by, exhaust gas recirculation (EGR) and high-sulfur diesel
fuels. It protects against damaging piston deposits, ring sticking and
sludge.
AMSOIL, the leader in automotive synthetic
lubrication, produced the world’s first API qualified synthetic motor
oil back in 1972. Trust the extensive experience of AMSOIL The
First in Synthetics® to do the best job protecting your
equipment.
Where these viscosity grades are
specified, AMSOIL Synthetic 10W-30/SAE 30 Diesel Oil provides
outstanding performance as a straight-grade SAE 30 for older two- and
four-stroke diesels and as a multi-grade SAE 10W-30 in modern
four-stroke diesel and gasoline engines. AMSOIL Synthetic Heavy Duty
Diesel Oil is ideal for use in a wide variety of light and heavy-duty
applications, including agriculture, off-road construction, trucking,
mining, industrial (pumps and generators) and personal automotive or
commercial transportation. It is recommended for use with low- or
high-sulfur diesel fuels in standard, turbocharged or supercharged
engines, all off-road engines and pre-2007 on-road engines.
• SAE 10W-30 performance
without VI improvers
• Cost-effective replacement for conventional oils
• Excellent shear stability
• Outstanding wear protection
• Superior protection over a broad range of operating temperatures
• Extended service life
AMSOIL ACD is recommended for diesel
engines, gasoline engines and other applications that require any of the
following worldwide specifications:
• API CI-4+/CH-4/CG-4/SL
• API CF/CE/CD/CC
• API CF-2/CD-II
• Global DHD-1
• ACEA A3/B3, E3, E5
• JASO DH-1
• Mack EO-M+, EO-N Premium Plus ’03
• Detroit Diesel Power Guard 93K214
• Caterpillar ECF-1a, ECF-2
• Cummins CES 20076/20077/20078 (current), 20071/20072 (older)
• Volvo VD5-3, VD5-2
• Mercedes Benz 228.1/228.3/229.1
• MAN 271/3275
• MTU Type 2
MIXING AMSOIL
AMSOIL ACD is compatible with conventional and synthetic motor oils,
however, mixing AMSOIL ACD with other oils will shorten the oil life
expectancy and reduce the performance benefits. AMSOIL does not
support extended drain intervals where AMSOIL ACD has been mixed
with another product.
Aftermarket additives are not
recommended for use with AMSOIL ACD.
SERVICE LIFE
AMSOIL Synthetic 10W-30/SAE 30 Heavy Duty Diesel Oil (ACD) is
recommended for extended drain intervals in engines that are
unmodified and in good operating condition.
Diesel Engine Service
- Three times (3X) OEM* recommendation, not to
exceed 50,000 miles/600 hours or one year, whichever comes
first. Drain intervals may be extended further with oil
analysis.
Gasoline Engine Service
- Two times (2X) OEM* recommendation, not to
exceed 15,000 miles or one year, whichever comes first.
*Operating conditions and drain intervals for
severe and normal service are defined by the OEM. Refer to your
owner’s manual.
Note:
Extended drain intervals are not recommended when using biofuels
containing >10% ethanol or 5% biodiesel (B5). Follow OEM drain
intervals or extend drain intervals with oil analysis.
AMSOIL Ea™ and Donaldson Endurance™
full flow oil filters are designed for extended drain intervals.
They stop smaller particles, have less restriction and last longer
than regular filters. For best performance, use AMSOIL Ea or
Donaldson Endurance oil filters.
AMSOIL Ea
By-pass oil filters are specialized for the
removal of small, wear-causing dirt particles, thereby extending
engine life. AMSOIL encourages using an AMSOIL Ea By-pass filter
system for maximum engine and oil life.
 \
Formulated without viscosity index
improvers (VI), AMSOIL
Synthetic 10W-30/SAE 30 Diesel Oil is shear stable, curbing viscosity
loss and associated bearing and cylinder bore wear. As seen in the
graph, Synthetic 10W-30/SAE 30 Diesel Oil leaves a wear scar
significantly smaller than competing diesel oils:
• SAE 10W-30 performance without VI
improvers
• Cost effective replacement for
conventional oils
• Excellent shear stability
• Outstanding wear protection
• Superior protection over a broad
range of operating temperatures
• High TBN effectively neutralizes
acids and protects against damaging piston deposits, ring sticking and
sludge
• Extended service life with oil
analysis
T's Advanced Synthetics
Greg and Marcy Thurman
Your Nationwide
AMSOIL
Authorized Independent
Dealer
Nationwide US Warehouses,
Canada and Palm Harbor, FL
727-798-8552
E-Mail:
greg@tsadvancedsynthetics.com
If you
experience problems or have questions or comments about
our website please email us at
greg@tsadvancedsynthetics.com
Home
|
T's Privacy Policy
|
Links |
Contact Us
|
