AMSOIL Premium SIROCCO Synthetic
Compressor Oil
AMSOIL
SIROCCO™ Synthetic Compressor Oil
is
ISO 32/46 (SEI)
AMSOIL SIROCCO® Synthetic Compressor Oil (SEI) is
recommended as a direct replacement for PAG compressor oils such as Sullair
Sullube 32® and Ingersoll-Rand SSR Ultra-coolant®. Not recommended for use with
Silicone base fluids.
AMSOIL SIROCCO® Synthetic Compressor Oil (SEI) is
formulated with premium synthetic ester technology. This high-quality,
long-life fluid lasts several times longer in use than mineral-based
oils. AMSOIL SIROCCO® Compressor Oil is fully formulated with
nondetergent additives and is designed for use in rotary screw
compressors and vacuum pumps. SIROCCO® effectively protects against
wear, oxidation, foam and rust and has inherent lubricity and good
thermal conductivity which allow it to reduce heat and energy
consumption. AMSOIL SIROCCO® Compressor Oil increases operating
efficiency, reducing money spent on energy, repair and maintenance
costs.
AMSOIL SIROCCO® Synthetic
Compressor Oil maintains performance across a wide operating temperature
range. Its low pour point, high viscosity index and lack of paraffins
(wax) makes it an excellent all season lubricant. At high temperatures,
SIROCCO® forms virtually no carbon, allowing for clean operation. At
cold temperatures, equipment starts easier and the lubricant is quickly
pumped to critical components, preventing lubricant starvation and
excessive wear. SIROCCO® Compressor Oil also resists water to prevent
damaging oil/water emulsions, allowing for longer lubricant life and
ease of water removal from the sump.
PERFORMANCE
FEATURES
• Resists foaming
• Rust and oxidation inhibited
• Readily separates from water
• Recommended for use in rotary screw compressors
• Long-life/extended drain performance.
• Compatible with polyglycol fluids such as Sullair Sullube 32® and
Ingersoll-Rand SSR Ultra-coolant®
• Biodegradable under the CEC-L33-A94 standard safety advantage
AMSOIL SIROCCO® Synthetic
Ester Compressor Oil has higher flash, fire and auto ignition points
than competitive petroleum oils. Its resistance to carbon formation and
the ashless additive system minimize the incidence of deposits acting as
ignition-promoting hot spots. Although AMSOIL SIROCCO® Synthetic
Compressor Oil increases fire safety, it cannot be considered
nonflammable.
APPLICATION RECOMMENDATION
AMSOIL SIROCCO® Synthetic Compressor Oil is a multi-viscosity oil
meeting the requirements of 5W-20. It may be used in applications
calling for either an ISO-32 or ISO-46 compressor oil or coolant. It is
recommended for use in single and multi-stage rotary screw compressors
and vacuum pumps that call for this viscosity.
When installing AMSOIL SIROCCO®
Compressor Oil, it is recommended that the old oil be thoroughly drained
and if warranted, the system cleaned. If a lot of carbon or residue is
found on the internal compressor parts, follow the manufacturer’s
recommendations for removal prior to installing the new oil. AMSOIL
SIROCCO® Compressor Oil has a high level of solvency and may remove
deposits left in the system. Check the filters and oil/air separators
regularly for the first 500 hours of operation and replace as necessary.
AMSOIL SIROCCO® Compressor Oil is
compatible with and recommended as a replacement for much higher priced
polyalkylene glycol (PAG) compressor oils or coolants such as Sullair
Sullube 32® and Ingersoll Rand SSR Ultra Coolant®. No flushing is
necessary when changing over from Glycol Coolants to AMSOIL SIROCCO®
Compressor Oil. However, draining the system and changing the filters is
recommended.
AMSOIL SIROCCO® Synthetic Compressor Oil
is recommended for use up to 8,000+ hours for most compressor
applications. However, this is subject to operating conditions and
maintenance practices. Monitoring by oil analysis every 1,000 hours is
recommended.
T's Advanced Synthetics
Greg and Marcy Thurman
Your Nationwide
AMSOIL
Authorized Independent
Dealer
Nationwide US Warehouses,
Canada and Palm Harbor, FL
727-798-8552
E-Mail:
greg@tsadvancedsynthetics.com
If you
experience problems or have questions or comments about
our website please email us at
greg@tsadvancedsynthetics.com
Home
|
T's Privacy Policy
|
Links |
Contact Us
|
